當前位置：信管網 >> 在線考試中心 >> 網絡工程師題庫 >> 試題查看

試卷名稱 2011年下半年網絡工程師考試上午真題試題（綜合知識）

考試中心《2011年下半年網絡工程師考試上午真題試題（綜合知識）》在線考試

試卷年份2011年下半年

試題題型【單選題】

試題內容

大型局域網通常組織成分層結構（核心層、匯聚層和接入層），以下關于網絡核心層的敘述中，正確的是（）。
A.為了保障安全性，應該以分組進行盡可能多的處理
B.將數據分組從一個區域高速地轉發到另一個區域
C.由多臺二、三層交換機組成
D.提供用戶的訪問控制

查看答案

相關試題

第51題：以下屬于萬兆以太網物理層標準的是（）。
A.IEEE802.3u
B.IEEE802.3a
C.IEEE802.3e
D.IEEE802.3ae
答案解析與討論：www.jycxcx.com/st/233813108.html

第52題： IEEE802.11采用了類似于802.3CSMA/CD協議，之所以不采用CSMA/CD協議的原因是（）。
A.CSMA/CD協議的效率更高
B.為了解決隱蔽終端問題
C.CSMA/CD協議的開銷更大
D.為了引進其他業務
答案解析與討論：www.jycxcx.com/st/2338218504.html

第53題：無線局域網（WLAN）標準IEEE802.llg規定的最大數據速率是（）。
A.1Mb/s
B.11 Mb/s
C.5 Mb/s
D. 54Mb/s
答案解析與討論：www.jycxcx.com/st/2338314423.html

第55題：網絡設計過程包括邏輯網絡設計和物理網絡設計兩個階段，各個階段都要產生相應的文檔，以下選項中，（1）屬于邏輯網絡設計文檔，（2）屬于物理網絡設計文檔。
（1）A.網絡IP地址分配方案
B.設備列表清單
C.集中訪談的信息資料
D.網絡內部的通信流量分布
（2）A.網絡IP地址分配方案
B.設備列表清單
C.集中訪談的信息資料
D.網絡內部的通信流量分布
答案解析與討論：www.jycxcx.com/st/2338524187.html

第56題： A transport layer protocol usually has several responsibilities .One is to create a process-to-process communication;UDP uses (1)numbers to accomplish this.Another Responsibility is to provide control mechanisms at the transpt level.UDP does this task at a very minimal level.There is no flow control mechanism and there Is no(2) for received packet. UDP,however ,does provide error control to some extent.If UDP detects an error in the received packet,it will silently drop it.The transport layer also provides a connection mechanism for the processes.The(3)must be able to send streams of data to the transport layer.It is the responsibility of the transport layer at (4)station to make the connection with the receiver.chop the stream into transportable units,number them,and send them one by one.It is the responsibility of th transorort layer at the receiving end to wait until all the different units belong to th same process have arrived,check and pass those that are(5) free ,and deliver them to the receiving process as a stream.

(1)A. hop
B. port
C. route
D.packet
(2)A. connection
B. window
C. acknowledgement
D.destination
(3)A. jobs
B. processes
C. proarams
D.users
(4)A. sending
B. routing
C. switching
D.receiving
(5)A. call
B. state
C. cost
D.error